The COMMANDER™ LEDLamp-II™ can also be incorporated for reliable visual indicator systems (5 colours) these can be set to Static-mode or Flash-mode operation and applied for magnet controls, locks made etc. The LEDLamp-II™ system uses high quality, high brightness energy saving coloured LED’s with good visibility even in bright environments. Each unit has instant illumination when power is applied when switched by auxiliary power relay contact/functional power signal. LEDLamp-II™ can be set to Static-or Flash-mode giving many combinations of static or colour flash-mode.
The COMMANDER™ TalkBak™ system uses factory set security coded Infra-Red signals to communicate horizontally between cranes or other objects mobile or static (end walls etc). The hardware can be supplied to operate in Simplex (1 way) mode or Duplex (2 way). The usual application for this product is for volt free integration to on crane control systems where either switch activity (limits, load cells etc) become active/inactive and the status is required to be known on the partner to indicate an inhibit or active function. Each system incorporates either 5 or 8 volt free channels to enable multiple choice configurations.
The COMMANDER™ TalkBak™ Radio version signals to communicate between cranes or other objects mobile or static. The hardware can be supplied to operate in Simplex (1 way) mode or Duplex (2 way). The usual application for this product is for volt free integration to on crane control systems where either switch activity (limits, load cells etc) become active/inactive and the status is required to be known on the partner in the application to indicate an inhibit or active function. The system outputs a factory set security coded signals to the partner receiver (codes are taught between systems).
For a complete range of COMMANDER™ remote control, collision avoidance, command & communication systems see www.commander.co.uk website.
